Sharp PC-9800T, Manual

Page: 89 / 125

6
17. Repeat the above steps to remove another Cirrus Logic PD6832 CardBus
Controller .
18. Click Refresh .
19. Make sure both of Cirrus Logic PD6832 CardBus Controller are attached with
the X marks.
20. Click Close ; then, Yes .
21. Restart the system.
To use other PC cards, you need the following settings after the above steps:
1.
From the Start menu select Settings - Control Panel .
2. Double-click the PC Card icon.
3. In the PC Card Wizard, make sure No is selected, and click Next .
4. In the next window, make sure No is selected, and click Next again.
5. Click Finish.
6. Click Yes . The system automatically shuts down.
7. Turn on the notebook again.
8. From the Start menu, select Settings - Control Panel .
9. Double-click the System icon.
10. Select the Device Manager tab.
11. Double-click PCMCIA socket and make sure two Cirrus Logic PD6832
CardBus Controller s are displayed (without X marks).
12. Click OK .
13. Double-click the My Computer icon.
14. Double-click the C: icon.
15. Click the CardWork folder.
16. From the File menu, select Delete .
17. Click Yes , and delete all the files in the folder, following the instructions on the
screen.
Hardware Expansion 6-5