Sharp PC-9800T, Manual

Page: 53 / 125

2
6. Gently push the CD tray back into the notebook.
•
When inserting a CD, do not use force.
•
Make sure the CD is correctly inserted into the tray, then close the
tray.
•
Do not leave the CD tray open. Also, avoid touching the lens in the
tray. If the lens becomes dirty, the CD-ROM may malfunction.
•
Do not wipe the lens with materials with rough surface (such as paper
towels). Instead, use a cotton swab to gently wipe the lens.
FDA regulations require the following statement for all laser-based
devices:
‘‘
Caution, Use of controls or adjustments or performance of
procedures other than those specified herein may result in hazardous
radiation exposure.
’’
Removing a CD
1. Make sure the CD-ROM drive indicator does not light on.
2. Press the eject button to open the CD tray slightly.
3. Gently pull out the tray.
4. Remove the CD from the tray.
5. Gently push the CD tray back into the notebook.
•
When opening the CD tray, if the CD is still spinning, wait until it has
stopped, then remove it.
•
Do not remove the CD if the CD-ROM indicator LED is still lit;
otherwise the notebook may malfunction.
•
Maximum output and wavelength of the laser: 4.3mW, 780nm
CLASS 1LASER PRODUCT
LASER KLASSE 1
For uninstalling and reinstalling the CD-ROM drive, see the section of
Installing Units into Bays .
2-14 Basic Operations