Sharp PC-9800T, Manual

Page: 47 / 125

2
2. Insert the unit into the bay with the connector forward.
When the unit is correctly installed, you hear a clicking sound, and the bay
lock latch returns to the original position.
Left-side Bay
The left-side bay is installed with the floppy disk drive when the notebook is
shipped. You can install the following units into the left-side bay.
•
Battery pack
•
AC adapter
To uninstall the unit in the left-side bay:
1.
Turn off the notebook.
2. Disconnect the AC adapter and all the peripheral devices.
3. Turn the notebook upside down on a flat place.
4. Slide the bay lock latch to the releasing position, and gently draw the unit out.
The bay lock latch
2
1
Figure 2-3. Uninstalling the unit in the left-side bay
To install the unit in the left-side bay:
1.
Make sure the notebook is turned off and upside down.
2. Insert the unit into the bay with the connector forward.
When the unit is correctly installed, you hear a clicking sound, and the bay
lock latch returns to the original position.
When using the AC adapter in the bay, you do not need the adapter
cable.
2-8 Basic Operations