E – 16
MANUAL COOKING
Convection
Convection has 2 functions, Oven and Water Oven, and
each function has 2 options, With Preheat or Without Preheat.
You can cook with one or two layers. Refer to online
cookbook, ensure the suitable menus and follow to
SHARP instructions.
Water Level:
1 or more (for Water Oven only)
Food Position:
Lower
Cooking with Preheat
* Suppose you want to cook 1 layer for 45 minutes
on Water Oven 2 at 160°C.
WARNING:
The oven door, outer cabinet and oven cavity will
become hot. Use thick oven gloves when adding or
removing foods to prevent burns.
NOTES:
1. If the oven door is not opened after preheating, the
oven will hold the preheat temperature for 20 minutes.
After that, the display will return to the initial one and
you have to reprogram from the step 1.
2. You can change the oven temperature during cooking.
See page E-20.
3. You can change the Superheated Steam Level during
cooking. See page E-20.
Cooking without Preheat
* Suppose you want to cook 2 layers for 45 minutes on
Oven at 160°C
P R O C E D U R E
Turn the
Knob
to select desired superheated
steam level (2:
),
then press
ENTER
to confirm.
2
Turn the
Knob
to enter
desired temperature
(160°C), then press
START
to preheat.
3
Turn the
Knob
to enter desired
cooking time (45 min.)
4
5
When preheat is over, place food in the oven.
Close the door.
6
1
No food in the oven.
* Depending on the menu,
only accessories should be put.
Press
MANUAL COOK
.
Press
START
.
7
P R O C E D U R E
2
Turn the
Knob
to enter desired temperature
(160°C) and press
ENTER
to confirm.
4
Turn the
Knob
to enter desired
cooking time (45 min.)
5
Press
START
.
6
7
1
Press
MANUAL COOK
.
Turn the
Knob
to select desired layer (2 tray)
without flashing “PREHEAT”,
then press
ENTER
to confirm.
3
After cooking, “EXTEND” will appear. If you
wish to extend cooking time, turn the
Knob
to
add time and press
START
within 1 minute.
If not, press
STOP/CLEAR
.
After the oven has cooled, remove and empty
the water tank, wipe oven cavity. Then empty
the drip tray.
8
Turn the
Knob
to select “PREHEAT” and
desired layer (1 tray),
then press
ENTER
to confirm.
Confirm flashing “CONVEC
OVEN” and “
”, then press
ENTER
.
After cooking, “EXTEND” will appear. If you
wish to extend cooking time, turn the
Knob
to
add time and press
START
within 1 minute.
If not, press
STOP/CLEAR
.
After the oven has cooled, remove and empty
the water tank, wipe oven cavity. Then empty
the drip tray.
AX-1700VM(R) En.indb 16
AX-1700VM(R) En.indb 16
27/9/2562 13:48:16
27/9/2562 13:48:16
