Sharp FO-IS115N, Operation Manual, Page: 76 / 178

Using MANUAL Mode
72
1
When the machine rings, pick up the handset.
2
If you hear a soft fax tone, wait until the display shows [RECEIVING] and
then replace the handset.
♦
If [ RECEIVING ] does not appear (or if you have set the Fax Signal Receive
setting to NO (pp. 139, 140)), press to begin reception.
3
If the other party first speaks with you and then wants to send a fax,
press after speaking. (Press before the sender presses their Start
key.)
•
When [RECEIVING] appears in the display, hang up.
START
START
Using MANUAL Mode
To select MANUAL mode, press until [ MANU ] appears in the
display.
In MANUAL mode, you must answer all calls (even faxes) by picking up the
machine’s handset.
Answering on the machine’s handset
Important: If a document is loaded in the machine’s feeder, remove it before
performing the steps below.
RECEPTION