Sharp FO-IS115N Operation Manual Download Page 55

Page: 55 / 178

Scan to Folder / FTP

2. Netw

Scanning

Type in the

Folder Path

(the name or IP address of the computer on which

the folder is located, followed by the path to the folder). For example, to
specify the “NetworkScanDocs” folder in the “Product Planning” folder on
“ComputerA”, type in the following:

\\ComputerA\Product Planning\NetworkScanDocs

Note:

The folder must be set as a folder that is shared on the network in the

folder properties.

Enter the

User Name

and

Password

required to access the computer. If your

network environment requires that you enter the domain name with the user
name, enter the

User Name

in the format

DomainName\UserName

Select the

File Format

of the scanned image. (The file format selected here is

a default format that will be used if a file format is not specified at the time of
transmission.)

When finished, click

Submit

Storing an FTP destination

To store an FTP destination, open the machine’s Web page as explained on
page 34.

Click

FTP

under

Destination Management

in the menu frame. The screen

below will appear.

Summary of Contents for FO-IS115N



















































































































































































Search results

Summary of Contents for FO-IS115N

Reviews:

Sharp FO-IS115N, Operation Manual, Page: 55 / 178

Search results

Summary of Contents for FO-IS115N

Reviews: