Sharp FO-IS115N Operation Manual Download Page 140

Page: 140 / 178

Timer Transmission

136

Enter the fax number using one of the methods below:

•

Rapid Key Dialling:

Press a Rapid Key.

•

Speed Dialling:

Press

and enter a 3-digit Speed Dial number.

•

Search Dialling:

Press

until the name or number of the other

party appears in the display.

•

Group Dialling:

Press a Group Key. Go directly to Step 10 (once a group

key is selected, no further destinations can be entered).

•

Direct Keypad Entry:

Enter the full fax number with the number keys. Go

directly to Step 10 (when a full fax number is entered, only one destination
can be entered).

Press

. If you wish to enter more destinations, go to Step 9. If you

have finished entering destinations or are only entering one destination,
go to Step 10.

Repeat Steps 7 and 8 for each of the destinations that you wish to enter.

(A maximum of 50 destinations can be entered.)

•

You can press

to scroll through and check your entered destinations.

To delete a destination, press

when it appears.

Press .

•

The document will be scanned into memory and the timer number
assigned to the job will appear briefly in the display. Transmission will take
place at the specified time.

•

If [

MEMORY FULL

] appears, see

If the memory becomes full

on page 115.

SPEED DIAL

DEL

START

Summary of Contents for FO-IS115N



















































































































































































Search results

Summary of Contents for FO-IS115N

Reviews:

Sharp FO-IS115N, Operation Manual, Page: 140 / 178

Search results

Summary of Contents for FO-IS115N

Reviews: