Sharp FO-IS115N Operation Manual Download Page 111

Page: 111 / 178

Printing a Document From an Application

107

6. Pr

inting

Printing a Document From an Application

When you are ready to print a document from an application on your

computer, select “Print” from the File menu.

•

The

Print

dialog box appears.

Make sure that “SHARP FO-IS115N” is selected as the printer.

If you need to select the paper size or adjust any of the other print

settings, click Properties, Setup, or Printer in the Print dialog box (the
name of the button varies depending on the application).

•

The

Printing Preferences

window appears. Adjust the settings as desired

(see pages 109 to 111) and then click

Select the print range and adjust any other settings as desired in the

Print dialog box.

When you are ready to begin printing, click “Print” or “OK” in the Print

dialog box.

Note:

When you adjust the print settings as explained above in Step 3, your

changes will only remain in effect while you are using the application. To make
permanent changes, see page 108.

Summary of Contents for FO-IS115N



















































































































































































Search results

Summary of Contents for FO-IS115N

Reviews:

Sharp FO-IS115N, Operation Manual, Page: 111 / 178

Search results

Summary of Contents for FO-IS115N

Reviews: