Sharp FO-IS115N Operation Manual Download Page 163

Page: 163 / 178

Problems and Solutions

159

12. T

roub

shooting

Copying problems

No reception occurs when
polling is attempted.

• Make sure the transmitting machine is in automatic

reception mode.

• If the transmitting machine has polling security, make

sure that your fax number has been entered both in
your machine (see page 26) and in the transmitting
machine.

Problem

Solution

The quality of copies is
poor and/or dark vertical
lines appear.

• Any dirt or material on the scanning glass will cause

spots to appear on copies and transmitted faxes.
Clean the scanning glass as explained on page 146.

The paper comes out
blank when you make a
copy.

• Make sure the original is placed

face down

in the

feeder.

The size of the printed
document image does not
match the size of the
paper.

• Make sure an appropriate enlarge/reduce setting is

selected (see page 112).

A copy is faint.

• Adjust the contrast setting (see page 58).

• If other printed output is also faint, the toner cartridge

may need replacement (see page 150).

Summary of Contents for FO-IS115N



















































































































































































Search results

Summary of Contents for FO-IS115N

Reviews:

Sharp FO-IS115N, Operation Manual, Page: 163 / 178

Search results

Summary of Contents for FO-IS115N

Reviews: