manualshive.com logo in svg

Sharp FO-IS115N, Operation Manual, Page: 162 / 178

Share
Download
Sharp FO-IS115N Operation Manual Download Page 162

Problems and Solutions

158

Fax reception problems

A distorted image is 
received at the other end.

• Noise on the telephone line may cause distortion. Try 

sending the document again.

• Make a copy of the document on your machine. If the 

copy is also distorted, your machine may need 
service.

Problem

Solution

The machine doesn't 
receive documents 
automatically.

• Make sure that the reception mode is set to AUTO. 

The paper comes out 
blank when you receive a 
fax.

• Make sure that the document is loaded properly in the 

feeder of the transmitting machine. Make a copy or 
print a report to confirm the printing ability of your 
machine.

The received document is 
faint.

• Ask the other party to resend the document using a 

higher contrast setting.

• If other printed output is also faint, the toner cartridge 

may need replacement (see page 150). 

Received images are 
distorted.

• Noise on the telephone line may cause distortion. 

Have the other party try sending the document again.

• Make a copy or print a report on your machine. If the 

copy or report is also distorted, your machine may 
need service.

When a fax is received, 
the size of the printed 
document image does not 
match the size of the 
paper.

• Make sure that an appropriate reception ratio setting 

has been selected (see page 142).

Summary of Contents for FO-IS115N



















































































































































































Reviews:

No comments