manualshive.com logo in svg

Sharp FO-IS115N, Operation Manual, Page: 102 / 178

Share
Download
Sharp FO-IS115N Operation Manual Download Page 102

Authorised Transmission

98

1

Touch any key on the operation panel of the machine and log in. 

2

Load the document in the feeder and perform all steps of the 

transmission.

•

When you finish the transmission procedure, if more than one supervisor 
has been stored, the display will show the name of the first supervisor  and 

[

SELECT APPROVER 

]. To select a different supervisor, press 

 or 

. When the name of the desired supervisor appears, press 

.

3

The machine will send an e-mail to the supervisor (with the scanned 

image as an attachment) notifying the supervisor of the transmission.

4

The supervisor checks the transmission information in the e-mail. 

To approve the transmission, the supervisor simply uses “Reply” (or 
equivalent command) to send the e-mail back to the machine. The 
supervisor must not change any of the content of the e-mail.

To deny the transmission, the supervisor must enter “REJECT” in the 
subject line and send the e-mail back to the machine using “Reply” or 
equivalent command. The supervisor must not change any other 
content of the e-mail.

5

If the transmission is approved, the machine will begin transmission.

If the transmission is denied, the machine will cancel the transmission.

6

You will receive an e-mail notification of the status of the transmission 

(this depends on the Authorised Transmission settings in the Web 
page).

START

Using Authorised Transmission

Follow the steps below to perform a fax or Scan to E-mail transmission when 
Authorised Transmission is enabled.

♦

If a timer transmission is not approved by the supervisor until after the set 
transmission time, transmission will begin as soon as approval is received.

Summary of Contents for FO-IS115N



















































































































































































Reviews:

No comments