manualshive.com logo in svg

Sharp FO-IS115N, Operation Manual, Page: 166 / 178

Share
Download
Sharp FO-IS115N Operation Manual Download Page 166

Messages and Signals

162

HEATER HIGH /
HEATER LOW /
LASER ERROR

If this message appears, unplug the power cord and 
then plug it back in. If the message still appears, call for 
service.

LINE ERROR

Transmission or reception was not successful. Press 

 to clear the message and then try again. If the 

error persists, see 

Line error

 on page 156.

M: xx%

This shows the percentage of the machine’s memory 
currently in use.

M#xxx

This appears while a document is being scanned and 
indicates the memory number assigned to the job (the 
number appears in “xxx”). This number appears when 

you check or cancel a job with the 

 key (page 70).

MEMORY FULL

If faxes have been received to memory because printing 
is not possible, resolve the problem so that printing can 
continue (see 

Reception to Memory

 on page 73). 

If faxes are being held in memory because the Secure 
Fax function has been activated, print the faxes as 
explained on page 88.
If you are attempting to broadcast or transmit from 
memory, see 

If the memory becomes full

 on page 115.

If you are copying, see 

If MEMORY FULL appears

 on 

page 113.

OUT OF PAPER /
PRINT CANCELED

Printing was canceled because the tray is out of paper. 
Press any key to clear the message, add paper, and 
repeat the print job.

PAPER JAMMED

The printing paper is jammed. See page 167.

RCVD FAX TRANSFER

This appears when the Fax to E-mail/Folder function is 
activated (page 122).

RECALLING

This appears if you attempt to send a fax by auto dialling 
and the line is busy or the receiving fax machine does 
not answer. Your machine will automatically reattempt 
the call. (See 

Automatic redialling

 on page 69.)

STOP

INFO

Summary of Contents for FO-IS115N



















































































































































































Reviews:

No comments