manualshive.com logo in svg

Sharp FO-2080, Operation Manual, Page: 234 / 257

Share
Download
Sharp FO-2080 Operation Manual Download Page 234

2

SCAN

18

C O N T E N T S

I N D E X

Scanning from a TWAIN-Compliant Application

(part 3)

7

Specify the scanning area and set the scan 
preferences.

For information on specifying the scan area and setting 
the scan preferences, see scanner driver Help.

☞

Scanner Driver Settings

8

When you are ready to begin scanning, click the 
"Scan" button.

Scanning begins and the image is acquired into the 
application that you are using. 
In the application, assign a file name and save the file.

Scanning a large area in full color at high resolution 
results in a large quantity of data and a prolonged 
scanning time. It is recommended that you set 
appropriate scanning preferences for the type of original 
being scanned, i.e., Web page (monitor), Photo, FAX, or 
OCR.

Caution

To cancel a scanning job after the "Scan" button has 
been clicked, press the [Esc] key on your keyboard, or 
the [CLEAR] key (

) or [CLEAR ALL] key (

) on the 

operation panel.

Note

Summary of Contents for FO-2080


































































































































































































































































Reviews:

No comments