manualshive.com logo in svg

Sharp FO-2080, Operation Manual, Page: 162 / 257

Share
Download
Sharp FO-2080 Operation Manual Download Page 162

INSTALLING THE SOFTWARE

56

6

Select "Sharp Button Manager 
X" in "Send to this 
application".

7

Click the "Apply" button.

8

Repeat Steps 5 through 7 to link Button Manager to "SC2:" 
through "SC6:".

Select "SC2:" from the "Scanner events" pull-down menu. Select "Sharp 
Button Manager X" in "Send to this application" and click the "Apply" button. 
Do the same for each ScanMenu through "SC6:".
When the settings have been completed, click the "OK" button to close the 
screen.

Button Manager is now linked to the scan menu  (1 through 6).
The scan settings for each of scan menus 1 through 6 can be changed with 
the setting window of Button Manager.
For the factory default settings of the scan menu and the procedures for 
configuring Button Manager settings, see "Button Manager Settings" in the 
Online Manual.

If other applications are shown, deselect the checkboxes for the other 
applications and leave only the Button Manager checkbox selected.

Note

!FO-2080.book  56 ページ  ２００９年５月１５日　金曜日　午前１０時４２分

Summary of Contents for FO-2080


































































































































































































































































Reviews:

No comments