manualshive.com logo in svg

Sharp FO-2080, Operation Manual, Page: 189 / 257

Share
Download
Sharp FO-2080 Operation Manual Download Page 189

TROUBLESHOOTING AND MAINTENANCE

83

8

3

Gently pull the TD (Toner/Developer) 
cartridge out while pressing the lock 
release button.

4

Remove the TD (Toner/Developer) cartridge from the bag. 
Remove the protective paper. Hold the cartridge on both sides 
and shake it horizontally four or five times. Hold the tab of the 
protective cover and pull the tab to your side to remove the 
cover.

5

While pushing the lock release 
button, gently insert the TD (Toner/
Developer) cartridge until it locks 
into place.

• After removing the TD cartridge, do not shake it or tap on it. Doing so 

may cause toner to leak from the cartridge. Put the old cartridge 
immediately in the bag contained in the box of the new cartridge.

• Dispose of the old TD cartridge in accordance with local regulations.

Lock release button

Note

4 or 5 times

Lock release button

!FO-2080.book  83 ページ  ２００９年５月１５日　金曜日　午前１０時４２分

Summary of Contents for FO-2080


































































































































































































































































Reviews:

No comments