Sharp FO-2080 Operation Manual Download Page 151

Page: 151 / 257

INSTALLING THE SOFTWARE

When installing is finished, click the "Close" button.

A message will appear instructing you to connect the machine to your
computer. Click the "OK" button.

Make sure that the power of the machine is turned on, and then
connect the USB cable (p.46).

Windows will detect the machine and a Plug and Play screen will appear.

Follow the instructions in the plug and play window to install
the driver.

Follow the on-screen instructions.

This completes the installation of the software.

• If you installed Button Manager, set up Button Manager as explained in "SETTING

UP BUTTON MANAGER" (p.53).

• If you installed Sharpdesk, the Sharpdesk setup screen will appear. Follow the

instructions in the screen to set up Sharpdesk.

• If you are using Windows Vista and a security warning window

appears, be sure to click "Install this driver software anyway".

• If you are running Windows 2000/XP and a warning message

appears regarding the Windows logo test or digital signature, be sure
to click "Continue Anyway" or "Yes".

After the installation, a message prompting you to restart your computer
may appear. In this case, click the "Yes" button to restart your computer.

• If you are using Windows Vista and a security warning window

appears, be sure to click "Install this driver software anyway".

• If you are running Windows 2000/XP and a warning message

appears regarding the Windows logo test or digital signature, be sure
to click "Continue Anyway" or "Yes".

Caution

Note

Caution

!FO-2080.book 45 ページ２００９年５月１５日　金曜日　午前１０時４２分

Summary of Contents for FO-2080


































































































































































































































































Search results

Summary of Contents for FO-2080

Reviews:

Sharp FO-2080, Operation Manual, Page: 151 / 257

Search results

Summary of Contents for FO-2080

Reviews: