manualshive.com logo in svg

Sharp FO-2080, Operation Manual, Page: 191 / 257

Share
Download
Sharp FO-2080 Operation Manual Download Page 191

TROUBLESHOOTING AND MAINTENANCE

85

8

2

Hold the drum cartridge handle 
and gently pull the cartridge out. 
Dispose of the old drum cartridge 
in accordance with local 
regulations.

3

Remove the new drum cartridge from the protective bag and 
remove the protective cover from the cartridge. Gently install 
the new drum cartridge.

4

Gently install the TD (Toner/Developer) cartridge. To install the 
TD cartridge, see "INSTALLING THE TD (TONER/DEVELOPER) 
CARTRIDGE" (p.14).

5

Close the front cover and then the side cover by pressing the 
round projections near the side cover open button. The drum 
replacement required error indicator will go out and the ready 
indicator will light up.

Do not touch the surface of the drum (green portion). 
Doing so may cause smudges on the copies.

When closing the covers, be sure to close the front cover securely and 
then close the side cover. If the covers are closed in the wrong order, 
the covers may be damaged.

Drum cartridge handle

Note

Note

!FO-2080.book  85 ページ  ２００９年５月１５日　金曜日　午前１０時４２分

Summary of Contents for FO-2080


































































































































































































































































Reviews:

No comments