Sharp FO-2080 Operation Manual Download Page 171

Page: 171 / 257

USER SETTINGS

AE LEVEL ADJUST

1: SPF/RSPF

(Adjustment to
5 levels is
possible.)

2: DOCUMENT

GLASS
(Adjustment to
5 levels is
possible.)

• This is used to adjust the

exposure level.

• The automatic exposure level can

be adjusted separately for the
document glass and the RSPF.

• For the procedure for adjusting

the exposure and guidelines
for numeric values, see page
28. The factory default setting
for the exposure level is center.

LANGUAGE

1: AMERICAN

ENGLISH

2: ENGLISH
3: FRENCH
4: SPANISH

• This is used to set the

language used in the display.

RESET FACTORY

1: YES

2: NO

• This is used to return all settings

to the factory default settings.

SORT AUTO
SELECT

1: ON

2: OFF

• Use this setting to enable or

disable sort auto select mode.

CHECK RSPF
OPEN

1: ON

2: OFF

• You can set the operation that

takes place if the [START] key
(

) is pressed when the

RSPF is not completely closed.
(For details on the "Check RSPF
open function", see page 25.)

VALID COPY
WIDTH

1: 8.5x11

2: 5.5x8.5

• Set the allowed paper sizes

for copying from the bypass
tray. When "5.5x8.5" is
selected, a copy of a letter
size original will only be
printed up to invoice size.

LSU SETTING

1: ON

2: OFF

• Select whether copying is only

allowed when the polygon
motor is rotating, or also when
the polygon motor is stopped.

PAPER TYPE

1: PLAIN PAPER

2: HEAVY PAPER

• Set the temperature of the

fusing unit when the bypass
tray is used.

DISPLAY
CONTRAST

1: LIGHTER
2: LIGHT

3: NORMAL

4: DARK
5: DARKER

• Set the contrast of the display.

Program

number

Program name

Setting codes

(factory default

setting appears

in bold)

Explanation

!FO-2080.book 65 ページ２００９年５月１５日　金曜日　午前１０時４２分

Summary of Contents for FO-2080


































































































































































































































































Search results

Summary of Contents for FO-2080

Reviews:

Sharp FO-2080, Operation Manual, Page: 171 / 257

Search results

Summary of Contents for FO-2080

Reviews: