manualshive.com logo in svg

Sharp FO-2080, Operation Manual, Page: 149 / 257

Share
Download
Sharp FO-2080 Operation Manual Download Page 149

INSTALLING THE SOFTWARE

43

5

6

Read the "Readme First" in the "Welcome" window and then 
click the "Next" button.

7

To install all of the software, 
click the "Standard" button 
and go to step 12.
To install particular packages, 
click the "Custom" button and 
go to next step.

8

Click the "MFP Driver" button.

Click the "Display Readme" button 
to show information on packages 
that are selected.

9

The files required for installation of the MFP driver are copied.

Follow the on-screen instructions.

When "The installation of the SHARP software is complete." appears, click 
the "OK" button.

• If you are using Windows Vista and a security warning window 

appears, be sure to click "Install this driver software anyway".

• If you are running Windows 2000/XP and a warning message 

appears regarding the Windows logo test or digital signature, be sure 
to click "Continue Anyway" or "Yes".

Caution

!FO-2080.book  43 ページ  ２００９年５月１５日　金曜日　午前１０時４２分

Summary of Contents for FO-2080


































































































































































































































































Reviews:

No comments