No disc
reset
The power turns off after "RESET" is
displayed for about 1 second.
Please.
The registered broadcasting station cannot be called.
ÿ Did you unplug the power cord or have a power outage?
Consideration
1 Power cord
ÿ Did you perform the reset operation?
Cant lead
Unplug from
the outlet.
Please re-register. P.26
Plug in the power cord.
About the soup phenomenon
In
the following cases, soup (water droplets) may form on the internal lens
or disc. • Immediately after turning on the heating. • When placed in a
room filled with steam or humidity. • When you suddenly move from a cold
place (room) to a warm room. If it gets soaked ... The signal on the disc
may not be read and this product may not operate normally. To remove
the soup ... If you remove the disc and turn on the power, the soup will be
removed in about an hour and it will operate
normally.
If an abnormality occurs
While using this product, it may not be
displayed correctly if it receives strong external
noise (such as shock, excessive static electricity, or
abnormal power supply voltage due to a lightning
strike) or if an incorrect operation is
performed.
An error may occur, such
as not being able to accept operations. In such a case, perform the reset
operation as follows. Reset operation
Note If
you perform the reset operation, all the registered contents will be deleted.
Continuous sounds such as "sea" and "za" are included
in the broadcast. ÿ Noise is generated when receiving a radio
broadcast near a TV, computer, word processor, etc. In such
cases, try moving away from areas where noise is likely to
occur. ÿ Is the direction of the antenna wrong? P.25 I can't
receive the radio broadcast well . There is a lot of noise.
If there is
a power
cord near the antenna wire, release it .
2 Hold down [POWER]
Even if you insert a CD, "CD NO DISC" and "Can't READ" are
displayed. The playback sound is interrupted. ÿ Is the front and back
of the CD wrong? ÿ Is there any dirt or scratches? ÿ Are you using
a non-standard CD? ÿ Are you using it in an unstable place with a
lot of vibration? ÿ Is there a soup phenomenon? P.75 Even if I
press the operation button, it does not work. Also, it will stop in the
middle of the song and will not play correctly. ÿ Is the CD dirty or
scratched? ÿ Are you using a non-standard CD? ÿ Are you using it in
an unstable place with a lot of vibration? ÿ Is there a soup
phenomenon? P.75 The playback sound is interrupted. ÿ Is the CD
dirty or scratched? ÿ Are you using it in an unstable place with a lot
of vibration? ÿ Is there a soup phenomenon? P.75
Please re-register. P.26
CD
75
1-BIT MD / CD SYSTEM SD-FX10
"
"
Is it
a
hindrance?
If
you think
Machine Translated by Google