15
1-BIT MD / CD SYSTEM SD-FX10
Unplug the power
cord from the container when you are not using it for a long time, such as
when traveling to save power. Even when the power is turned off, it consumes
a small amount of power. • If you unplug the power cord, the clock settings will
disappear after about 10 minutes, and the registered broadcasting stations will
disappear after about 1 day, so reconnect them. Precautions • When
removing the power cord or loop antenna for AM, hold the plug and pull it
out. Pulling the wire may cause disconnection. • Make sure to insert the plug
securely. • When unplugging the power cord, turn off the power and then plug it
in.
power
Various ways
of listening
You can also turn it on and off by pressing [TRACK] on the remote control.
edit
power
ÿ To display the demo display When the
power is off
• Never use a power cord other than the accessories. It may cause a
malfunction or accident. Information • Please use this product in a place
of 5 ÿ ÿ 35 ÿ. • If you use this product near devices such as TVs, PCs, and
mobile phones, those devices and this product may malfunction or cause
noise. In that case, turn off the power of those devices or keep them as far
away from this product as possible.
Preparation
Recording sound
Consideration
Group
recording / playback
If you press [POWER] to turn on the power while the demo is displayed,
the demo display disappears. Press [POWER] again to return to the
demo display.
Press [TRACK] for 2 seconds or longer.
When the power is turned off, the display automatically lights up and
changes to various display contents, which is called a demo display. At the
time of purchase, the demo display is canceled.
listen
truck
beginning
• Fun music can be annoying in some places. Be careful not
to bother your neighbors.
• When using at night, turn down
the volume or listen to the
sound of the head so as not to
bother your neighbors . Etiquette • When using headphones,
turn down the volume so as not to irritate your ears.
Convenient
•
Please pull out.
•
truck
ÿ To cancel the demo display Press [TRACK] during
the demo display.
Note If the
power is turned on by pressing [POWER] when the power is off, the
demo display cannot be set.
•
power
Setting and canceling the demo display
truck
Setting and disassembling the demo display
Machine Translated by Google