Sharp AR-F152, Service Manual

Page: 76 / 170

J. Remove the pickup unit.
1) Lift the paper stopper.
2) Slide the pickup roller unit in the arrow direction.
3) Slide the bushing.
4) Remove the pickup roller unit.
(Note) When installing, hang the projection of the roller unit on the
solenoid arm.
K. Remove the manual feed roller and the pickup
roller.
1) Remove the parts.
2) Remove the manual feed roller.
3) Remove the pickup roller and the parts.
L. Remove the transport unit.
1) Remove the connector.
2) Remove two screws.
3) Remove the document tray unit.
4) Remove four screws.
5) Remove the transport unit.
M. Remove the belt.
1) Remove the belt.
N. Remove the SPF motor.
1) Remove the connector.
2) Remove four screws.
3) Remove the drive frame.
4) Remove the belt.
5) Remove two screws.
6) Remove the SPF motor.
(Note) When installing, attach the belt as shown in the figure.
1
2
1
3
3
3
3
4
1
3
1
2
2
4
5
5
6
1
4
2
3
A
1
2
3
1
1
4
AR-F152
7 – 33