Sharp AR-F152, Service Manual

Page: 64 / 170

H. PS roller
1) Remove the parts.
2) Remove the PS roller.
I. Paper exit roller
1) Remove the parts.
2) Remove the paper exit roller.
10. 2nd cassette section
No. Part name Ref.
A Paper sensor
B Cassette detection SW
C Paper feed solenoid
D Transport roller
E Paper feed clutch
F 2nd paper feed roller
Paper feed unit removal
1) Remove the screw.
2) Remove the rear cover.
∗
When installing, engage the pawl and install the unit.
1) Open the right cabinet.
2) Remove three screws.
3) Remove one connector.
4) While tilting down the 2nd connection arm A, pull and remove the
paper feed unit toward you.
∗
When installing, securely insert two bosses C on the machine side
and two bosses D on the paper feed unit side. Be sure to fix the
earth B.
∗
Insert the 2nd page feed.
A. Paper sensor
1) Remove the pawl.
2) Remove the paper sensor.
3) Remove the harness.
1
1
2
1
2
1
1
2
A
1
2
4
B
A
D
D
C
3
2
3
1
AR-F152
7 – 21