Sharp AR-F152, Service Manual

Page: 65 / 170

B. Cassette detection SW
1) Remove the pawl.
2) Remove the cassette detection SW.
3) Remove the harness.
C. Paper feed solenoid
1) Remove the screw.
2) Remove the connector.
3) Remove the paper feed solenoid.
D. Transport roller
1) Remove two E-rings.
2) Remove the transport roller.
∗
Install so that the earth spring A is brought into contact over bearing
B.
E. Paper feed clutch
1) Remove the E-ring.
2) Remove the paper feed clutch.
3) Remove the parts.
∗
When installing, fit the cut surface A.
F. 2nd paper feed roller
1) Remove the E-ring and the parts.
2) Remove the 2nd paper feed roller.
∗
When installing, hang the 2nd connection arm on the 2nd connec-
tion arm SP B. Be sure to install so that the earth spring C is in con-
tact under the bearing D.
1
2
3
1
2
3
4
2
1
3
A
B
A
1
2
3
B
1
2
1
C
D
A
AR-F152
7 – 22