Sharp Actius PC-UM30W Operation Manual Download Page 76

Page: 76 / 124

5-2

Connecting the Modem to a Telephone Line

Turn off your computer.

Open the cover for the modem jack on the right side of your computer.

To avoid damaging the modem, close the cover after you finish using the
built-in modem.

Connect one end of the included modem cable to the modem jack.

Do not insert the modem cable into the LAN jack. It may damage the LAN
jack or the modem cable.

Connect the other end of the modem cable to the telephone line.

Turn on the computer.

Connect the modem to the telephone line directly. Do not use a
distributor or allotter.

Configuring the Modem in Windows 2000

Make the necessary adjustments as shown below.

1. From

the

Start menu, select Settings - Control Panel.

2. Double-click

the

Phone and Modem Options icon.

Modem Jack

Cover

Summary of Contents for Actius PC-UM30W





























































































































Search results

Summary of Contents for Actius PC-UM30W

Reviews:

Related manuals for Actius PC-UM30W

Brands by name

Popular brands

Sharp Actius PC-UM30W, Operation Manual

Search results

Summary of Contents for Actius PC-UM30W

Reviews:

Related manuals for Actius PC-UM30W

Brands by name

Popular brands