Sharp Actius PC-UM30W Operation Manual Download Page 69

Page: 69 / 124

4-21

Insert a CF card into the slot with the label face up until it locks into place.

Ejecting CF Card

•

Some CF cards may become hot after long use.

•

Be sure to use the procedure below when ejecting a CF card.
Otherwise, the system may not work properly.

In Windows 2000

1. Click

Unplug or Eject Hardware icon (

) on the taskbar.

2. Click

Stop xxxxx (xxxxx is the name of your CF card).

3. Click

OK and go to Ejecting CF card on the next page.

In Windows XP Professional

1. Click

Safely Remove Hardware icon (

) on the taskbar. If you cannot find the

icon, click

to show all kinds of icons.

2. Click

Safely remove xxxx (xxxxx is the name of your CF card); then, Safe To

Remove Hardware dialog appears. Go to Ejecting CF card on the next page.

Label Facing Up

Summary of Contents for Actius PC-UM30W





























































































































Search results

Summary of Contents for Actius PC-UM30W

Reviews:

Related manuals for Actius PC-UM30W

Brands by name

Popular brands

Sharp Actius PC-UM30W, Operation Manual

Search results

Summary of Contents for Actius PC-UM30W

Reviews:

Related manuals for Actius PC-UM30W

Brands by name

Popular brands