Sharp Actius PC-UM30W Operation Manual Download Page 58

Page: 58 / 124

4-10

Removing External CD-ROM Drive Unit

In Windows 2000

Remove the CD from the CD-ROM drive unit.

2. Click

Unplug or Eject Hardware icon (

) on the taskbar.

3. Click

Stop USB Mass Storage Device.

4. Click

OK; then, remove the USB cable from the computer.

In Windows XP Professional

1. Click

Safely Remove Hardware icon (

) on the taskbar.

2. Click

Safely remove USB Mass Storage Device; then, Safe To Remove Hardware

dialog appears.

Remove the USB cable from the computer.

Mode Switches

There are the mode switches on the bottom of the CD-ROM unit.
These switches are for technical services. Keep them as a default setting, OFF.

Cleaning External CD-ROM Drive Unit

•

Do not use solvents such as benzine, thinner, alcohol, record cleaner or anti-static
spray.

•

Clean the outside of the drive with a soft, dried cloth.

•

Clean the lens with a commercial lens blower if the lens is dirty.

Mode Switches

Summary of Contents for Actius PC-UM30W





























































































































Search results

Summary of Contents for Actius PC-UM30W

Reviews:

Related manuals for Actius PC-UM30W

Brands by name

Popular brands

Sharp Actius PC-UM30W, Operation Manual

Search results

Summary of Contents for Actius PC-UM30W

Reviews:

Related manuals for Actius PC-UM30W

Brands by name

Popular brands