User’s guide
HRP/D
-
34
-
HS
Installation and removal of units
12.1
SAFETY MEASURES
Before installing or removing units always observe the
following safety measures:
1.
Switch off the foot switch by setting switch
F
to hand
operation.
2.
Clear the working surface.
3.
Switch off the control units one at a time (switch
L
).
4.
Turn off the main switch (switch
A
).
5.
Remove the plug from the socket.
6.
Check that the heating elements and pressure bars in the
top frame are firmly attached.
7.
Allow the heating elements to cool for at least
10
minutes.
12.2
CONTROL UNIT
12.2.1
Removal
1.
Remove the front solid core strips by undoing the socket
head screws. (Use socket screw key
no. 6
).
2.
Slide the heating elements backwards (see Section
8
).
3.
Loosen the socket head screws on the cover plate above
the control unit one turn and slide the plate backwards.
(Use socket screw key
no. 5
).
12
10 minutes
3
Summary of Contents for HRP/D
