User’s guide
HRP/D
-
21
-
HS
Adjustment
8
3.
Loosen the socket head screw in the centre of the heating
element one half turn.
(Use socket screw key
no. 3
)
4.
Take the heating element with both hands close to the
supporting prongs on the left and right and slide it into the
desired position.
Hold the heating element parallel to the front of the
machine and the supporting prongs. This prevents the
notched nuts in the aluminium
X
-profiles from binding.
5.
Hand tighten the socket head screws,
starting
in the
supporting prongs and
then
in the centre.
6.
Position the other profiles in the same way if necessary.
7.
Fill up the space between the heating elements as far as
possible with solid core strips and hand tighten them. First
slide the notched nuts into the aluminium
X
-profile
roughly level with the holes and then lay the solid core
strip on top.
8.
Switch on the machine again as in Section
7
.
3
4
Summary of Contents for HRP/D
