5. Peel off the backing from the adhesive on the other side of the switch.
6. On the ELEVATOR side of the curtain, while keeping both the switch and
the curtain FLAT, mount the back of the switch directly against the back
of the switch you mounted in step 4.
7. Use zip ties and the mounting bracket in the housing to stabilize extra
wire, keeping wire free of other housing components.
8. Tape the wire to the curtain with the Kapton® tape to stabilize the wire.
NOTE: There is a delay of several seconds after deployment before the curtain rewind
switch will operate. This avoids accidental activation during deployment.
Re-attaching the Housing Door
When you have completed the curtain installation, you can re-attach the housing door.
the elevator
shaft side of
curtain
22
