Seypos DT6800, Configuration Manual

Page: 16 / 165

11
SERIAL PARAMETER DEFAULTS
The table below lists the defaults for serial host parameters. To change any
option, scan the appropriate bar code(s) provided in the Serial Host
Parameters section.
Note: See Appendix A, Standard Default Parameters for all user preferences,
hosts, symbologies, and miscellaneous default parameters.
Serial Host Default Table
Serial Host Parameters
Parameter Default
Serial Host Types Standard
Baud Rate 9600
Parity Type None
Stop Bit Select 1 Stop Bit
Data Bits 8-Bit
Check Receive Errors Enable
Hardware Handshaking None
Software Handshaking None
Host Serial Response Time-out 2 Sec
RTS Line State Low RTS
Beep on <BEL> Disable
Intercharacter Delay 0 msec
Nixdorf Beep/LED Options
Normal
Operation
Ignore Unknown Characters
Send Bar
Code