120
Chapter 7
Miscellaneous Scanner Options
Introduction
This chapter includes commonly used bar codes to customize how data is
transmitted to the host device.
See
Appendix A, Standard Default Parameters
for all host device and
miscellaneous scanner defaults. If the default values suit requirements,
programming is not necessary.
Note: Most computer monitors allow scanning the bar codes directly on the
screen. When scanning from the screen, is sure to set the document
magnification to a level where the bar code can be seen clearly, and bars
and/or spaces are not merging.
To return all features to default values, scan the
Set Default Parameter
bar
code. Throughout the programming bar code menus, default values are
framed.
Scanning Sequence Examples
In most cases, scan one bar code to set a specific parameter value. Other
parameters, such as Prefix Value, require scanning several bar codes. See
each parameter for descriptions of this procedure.
Errors While Scanning
Unless otherwise specified, to correct an error during a scanning sequence,
just re-scan the correct parameter.
Summary of Contents for DT6800
Page 1: ...Configuration Guide SEYPOS DT6800 Hand Free Area Image Scanner V1 3...
Page 25: ...20 None ACK NAK ENQ ACK NAK with ENQ XON XOFF...
Page 105: ...100 GS1 DataBar Limited Enable GS1 DataBar Limited Disable GS1 DataBar Limited...
Page 160: ...155 8 9 Cancel To correct an error or change a selection scan the bar code below Cancel...
