Seypos DT6800, Configuration Manual

Page: 37 / 165

32
* Note: Steps for activating CDC COM port emulation (USB virtual COM):
1. Execute the driver (installMOTCDC.exe). If
you don’t have the driver,
contact your distributor.
2. Connect the scanner USB cable to the host computer. The scanner would
give a “Do Re Mi” melody when powered on.
3. Rea
d the “CDC COM Port Emulation” barcode to set up the interface.
4. On the computer, check Device Manager to see if the computer
successfully detects the scanner as
“Bar Code Scanner.” The COM
port number would vary depending on different hardware environment.
5. If you
can’t directly install the driver follow the Found New Hardware Wizard
to locate the install the driver.