Seypos DT6800, Configuration Manual

Page: 144 / 165

139
1
Data packet containing the data following an
encoded symbol separator character.
2 Data packet containing the data following an
escape mechanism character. The data packet
does not support the ECI protocol.
3 Data packet containing the data following an
escape mechanism character. The data packet
supports the ECI protocol.
UCC/EAN-128 emulation Note: UPC portion of
composite is transmitted using UPC rules.
1
Data packet is a UCC/EAN-128 symbol (i.e., data
is preceded with ]JC1).
PDF417, Micro
PDF417
0 Reader set to conform to protocol defined in 1994
PDF417 symbology specifications. Note: When
this option is transmitted, the receiver cannot
reliably determine whether ECIs have been
invoked or whether data byte 92DEC has been
doubled in transmission.
1 Reader set to follow the ECI protocol (Extended
Channel Interpretation). All data characters
92DEC are doubled.
2 Reader set for Basic Channel operation (no
escape character transmission protocol). Data
characters 92DEC are not doubled. Note: When
decoders are set to this mode, unbuffered Macro
symbols and symbols requiring the decoder to
convey ECI escape sequences cannot be
transmitted.
3
The bar code contains a UCC/EAN-128 symbol,
and the first codeword is 903-907, 912, 914, 915.
4
The bar code contains a UCC/EAN-128 symbol,
and the first codeword is in the range 908-909.
5
The bar code contains a UCC/EAN-128 symbol,
and the first codeword is in the range 910-911.
Example: A PDF417 bar code ABCD, with no transmission
protocol enabled, is transmitted as ]L2ABCD.
Data Matrix
0 ECC 000-140, not supported.
1 ECC 200.
2 ECC 200, FNC1 in first or fifth position.
3 ECC 200, FNC1 in second or sixth position.
EAN.UCC
Composites
(RSS,
UCC/EAN-128,
2D portion of
UPC
composite)