Seypos DT6800, Configuration Manual

Page: 96 / 165

91
MSI
Enable/Disable MSI
To enable or disable MSI, scan the appropriate bar code below.
Enable MSI
< Disable MSI >
Set Lengths for MSI
The length of a code refers to the number of characters (i.e., human readable
characters), including check digit(s) the code contains. Set lengths for MSI to
any length, one or two discrete lengths, or lengths within a specific range.

One Discrete Length - Select this option to decode only MSI
symbols containing a selected length. Select the length using the
numeric bar codes in
Appendix D, Numeric Bar Codes . For
example, to decode only MSI symbols with 14 characters, scan
MSI - One Discrete Length, then scan 1 followed by 4. To correct
an error or to change the selection, scan Cancel barcode.

Two Discrete Lengths - Select this option to decode only MSI
symbols containing either of two selected lengths. Select lengths
using the numeric bar codes in
Appendix D, Numeric Bar Codes .
For example, to decode only MSI symbols containing either 2 or 14
characters, select MSI - Two Discrete Lengths, then scan 0, 2, 1,
and then 4. To correct an error or to change the selection, scan
Cancel barcode.

Length Within Range - Select this option to decode a MSI symbol
with a specific length range. Select lengths using numeric bar
codes in
Appendix D, Numeric Bar Codes . For example, to decode
MSI symbols containing between 4 and 12 characters, first scan
MSI - Length Within Range. Then scan 0, 4, 1, and 2 (single digit
numbers must always be preceded by a leading zero). To correct