Seypos DT6800, Configuration Manual

Page: 41 / 165

36
USB IGNORE UNKNOWN CHARACTERS
This option applies only to the HID Keyboard Emulation device and IBM device.
Unknown characters are characters the host does not recognize. When Send
Bar Codes With Unknown Characters is selected, all bar code data is sent
except for unknown characters, and no error beeps sound. When Do Not Send
Bar Codes With Unknown Characters is selected, for IBM devices, bar codes
containing at least one unknown character are not sent to the host, and an
error beep sounds. For HID Keyboard Emulation devices, the bar code
characters up to the unknown character are sent, and an error beep sounds.
< Send Bar Codes with Unknown
Characters (Transmit) >
Do Not Send Bar Codes with
Unknown Characters (Disable)
EMULATE KEYPAD
When enabled, all characters are sent as ASCII sequences over the numeric
keypad. For example ASCII A would be sent as
“ALT make” 0 6 5 “ALT Break”.
This allows support for other country variants.
< Disable Keypad Emulation >
Enable Keypad Emulation