59
Decode UPC/EAN/JAN Supplementals
Supplemental are bar codes appended according to specific format
conventions (e.g., UPC A+2, UPC E+2, EAN 13+2). Six options are available.
If Decode UPC/EAN/JAN Only With Supplemental is selected,
UPC/EAN/JAN symbols without supplemental are not decoded.
If Ignore Supplemental is selected, and the decoder is presented
with a UPC/EAN/JAN with a supplemental, the UPC/EAN/JAN is
decoded and the supplemental bar code is ignored.
An Auto discriminate Option is also available. If this option is
selected, choose an appropriate
UPC/EAN/JAN
Supplemental Redundancy
value from the next page. A value of 5
or more is recommended.
Enable 378/379 Supplemental Mode to delay only EAN-13/JAN-13
bar codes sta
rting with a ‘378’ or ‘379’ prefix by the supplemental
search process. All other UPC/EAN/JAN bar codes are exempt
from the search and are reported instantly upon decodes.
Select Enable 978 Supplemental Mode to delay only
EAN-13/JAN-13 bar codes starting
with a ‘978’ prefix by the
supplemental search process. All other UPC/EAN/JAN bar codes
are exempt from the search and are reported instantly upon
decodes.
Select Enable Smart Supplemental Mode to delay only
EAN-13/JAN-13 bar codes starting with a
‘378’, ‘379’, or ‘978’ prefix
by the supplemental search process. All other UPC/EAN/JAN bar
codes are exempt from the search and are reported instantly upon
decodes.
Note: To minimize the risk of invalid data transmission, select either to decode
or ignore supplemental characters.
Summary of Contents for DT6800
Page 1: ...Configuration Guide SEYPOS DT6800 Hand Free Area Image Scanner V1 3...
Page 25: ...20 None ACK NAK ENQ ACK NAK with ENQ XON XOFF...
Page 105: ...100 GS1 DataBar Limited Enable GS1 DataBar Limited Disable GS1 DataBar Limited...
Page 160: ...155 8 9 Cancel To correct an error or change a selection scan the bar code below Cancel...
