DIGITAL WEIGHING INDICATOR
SI 4500
- 17 -
Decimal point position select with “0” key
Press “Enter” and move the next step.
Under this step, define the optimal position or Decimal point.
Whenever pressing
key, Decimal point will be changed, like XXX. – XX.X – X.XX - .XXX
The Max. Decimal point will be third place under Zero.
On the Optimal position, stop pressing
key and press
key to save and move to next
step.
Step No.3 - Setting “Digit / Division” value.
Set Digit(Division) with “0”
key.
Press “Enter” and move the next
step.
Press “Enter” and move the
next step.
Press
“
Enter
”
and move the next step.
Under this step, define the optimal Digit/Division value of weighing measurement.
Whenever pressing
key, the Digit/Division value will be changed, like 01-02-05-10-50.
On the optimal Digit/Division value, stop pressing
key and press
key to save and
move to next step.
Caution
※
※
※
※
(Max. capacity value / division value)
can not be over
20,000
.(as Indicator resolution is 1/200,00).
If the value is over 20,000, Error message
“ Err 01 “
will be displayed and move back
“CAPA”
mode
again.
