34
│ 6 Settings
6.3.1.4 Timer
For the
Timer
operating mode, you must specify when device
inspections are to be performed.
●
Day of the week
Days on which a device inspection is started. You can select
every day of a week or only certain days.
●
Start time
Time at which a device inspection is started on the set days
of the week.
6.3.2
Changing settings
The settings specified in
section 6.3.1 can be changed directly
using the test set.
Fig. 26: Settings
The test set is ready for use.
1. If necessary:
−
Switch to the top menu level.
2. Select
Settings
(fig. 26).
3. Select the desired menu item.
4. Change the settings.
5. Press the Enter key. The changed settings will be applied.
6. Press the Menu key to exit the
Settings
.