32
│ 6 Settings
6.3
Settings using the test set
6.3.1
Possible settings
The following settings for the test set can be made using the
test set:
●
Gas assignment
●
ATS mode
●
Device inspection mode
●
Timer
6.3.1.1 Gas assignment
Under
Gas assignment
, you can set which test gas is connected
to which test gas connection.
●
Gas 1
Test gas at test gas connection 1
●
Gas 2
Test gas at test gas connection 2
●
Gas 3
Test gas at test gas connection 3
Fig. 22 and fig. 23 shows the numbering of the test gas connec
-
tions.
6.3.1.2 ATS mode
Note:
Please refer to section 6.3.2 “Special feature when changing
The test set can be operated in various operating modes.
●
Manual
The device inspection must be started manually by the user.