18
│ 4 Operation
4.3
Placing the device in the test set
NOTICE! Incorrect operation or damage to property in case
of jamming
The electrical contact of the device to the test set and the gas
supply from the test set to the device can only be ensured if the
device does not jam when inserted.
●
Always insert the device carefully.
Fig. 15: Placing the device in the test set
(test set shown without canister holder)
Inserting the device (fig. 15)
1. Pull the locking mechanism upwards as far as it will go. 1
2. Place the device with the front lower edge in the device holder.
Tilt the device backwards. 2