14
│ 3 Preparing for start-up
Mounting the test set on a vertical surface (fig. 8)
1. Pull the supporting bracket down vertically. Remove the sup-
porting bracket. 1
2. Attach the supporting bracket to the surface. 2
− Using the supporting bracket, mark the 3 holes that need
to be drilled.
−
The open side of the bracket
1
must face the surface, the
smooth side towards the user.
−
Align the supporting bracket horizontally before tightening.
3. Plug the device plug of the AC/DC adapter into the power
supply connection of the test set.
4. Place the cable of the AC/DC adapter carefully in the cable
guide.
5. Slide the test set into the supporting bracket. 3
−
Insert the pins into the slots on both sides.
6. Push the test set down until it clicks into place. 4
7. Secure the test set on both sides with the 2 self-tapping
screws. 5
1
Reinforcement ribs visible