1 Introduction
│
3
1.5
Safety information
This product was manufactured in keeping with all binding legal
and safety regulations.
The product is safe to operate when used in accordance with the
instructions provided. However, when handling the product, there
may be risks to persons and property. For this reason, observe
the following safety information without fail.
●
Observe all the applicable safety standards and accident pre-
vention regulations.
●
Use the product only as intended.
● Do not make any changes or modifications to the product
unless these have been expressly approved by Hermann
Sewerin GmbH.
●
Only use accessories and consumables approved by Hermann
Sewerin GmbH.
●
Always observe the permitted operating and storage temper-
atures.
● Handle the product carefully and safely, both during transport
and when working.
●
Do not use the product if it is damaged or faulty.
● Protect the ports and sockets against dirt, and electrical ports
in particular against moisture.
●
Never carry the test set by the locking mechanism or the sup-
porting bracket.
●
Only operate the test set in well ventilated rooms.
●
Do not operate the test set in potentially explosive or oxy-
gen-enriched atmospheres.
●
Handle test gases in a professional manner.
●
The test set complies with the requirements of Directive
2014/30/EU (EMC). When using the product close to devices
with radio transmitters:
−
Comply with the information in the operating instructions for
the devices regarding emission of interference.