Senter AV6418 OTDR User Manual Download Page 14

Page: 14 / 170

SIE-CNTEP-1100002104-2014
LCFS

AV6418 OTDR

contaminant such as acetone, motor oil, antifreezing fluid,

factice, etc., otherwise, it will cause LCD works abnormally.

(3) Clean LCD with silk cloth or soft cloth. Don

’

t use organic

solvent to clean it. Otherwise, it may damage the LCD.

Use of

OTDR

(1) There is precise and fragile ceramic locating core inside

the optical output connector of the instrument, so please be

sure to insert optical fiber plug gently and parallelly and

align it with locating pin and then tighten it.

(2) When performing measurement with this instrument, you

must keep the inside and end face of optical output

connector clean and avoid polluting the optical output

connector with factice, etc. contaminant, otherwise, it will

cause measurement error and even that the instrument is

incapable of testing optical fibers.

(3) If possible, please make the end of the optical fiber

under test point to an unreflected object during testing.

Maintenance

(1) Please pack this instrument in original packing material

when shipping to avoid serious impact and vibration.

(2) Before using this instrument, please carefully check and

make sure the instrument model is AV6418 Optical Time

Domain Reflectometer, the instrument has not evident

damage on the surface and all accessories are complete.

(3) Store the instrument under the ambient temperature

Página No.22 LCFS

CONVALIDACIÓN DE ERRORES DEL PROCESO:

“ADQUISICIÓN DE OTDR (OPTICAL TIME DOMAIN REFLECTOMETER) – REDES GPON/
FTTH/ SDH"

Summary of Contents for AV6418 OTDR











































































































































































Search results

Summary of Contents for AV6418 OTDR

Reviews:

Related manuals for AV6418 OTDR

Brands by name

Popular brands

Senter AV6418 OTDR, User Manual

Search results

Summary of Contents for AV6418 OTDR

Reviews:

Related manuals for AV6418 OTDR

Brands by name

Popular brands