Senter AV6418 OTDR User Manual Download Page 74

Page: 74 / 170

SIE-CNTEP-1100002104-2014
LCFS

AV6418 OTDR

confirm the setting and exit from the setup interface back to

the main screen; press

key to cancel the modification

and return to the main screen.

(1) There are two markers (marker A and marker B) when

the test item is set as average loss or reflection loss.

(2) There are four markers (marker a, marker A, marker B

and marker b) when the test item is set as splice loss.

1.2.4 Set Test Wavelength

Modify and set OTDR test wavelength through the following

description:

Figure 8-12 Set test wavelength

Note!

Página No.82 LCFS

CONVALIDACIÓN DE ERRORES DEL PROCESO:

“ADQUISICIÓN DE OTDR (OPTICAL TIME DOMAIN REFLECTOMETER) – REDES GPON/
FTTH/ SDH"

Summary of Contents for AV6418 OTDR











































































































































































Search results

Summary of Contents for AV6418 OTDR

Reviews:

Related manuals for AV6418 OTDR

Brands by name

Popular brands

Senter AV6418 OTDR, User Manual

Search results

Summary of Contents for AV6418 OTDR

Reviews:

Related manuals for AV6418 OTDR

Brands by name

Popular brands