Senter AV6418 OTDR User Manual Download Page 17

Page: 17 / 170

SIE-CNTEP-1100002104-2014
LCFS

AV6418 OTDR

replacements

whatsoever

products

purchased.

Accessories, including but not limited to indicator lamps and

batteries etc. used for this product are not covered by the

warranty herein.

If the instrument must be returned to Shandong Senter

Electronic

Co.,

Ltd

for

repair,

calibration

other

maintenance, please pay attention:

(1) If the instrument has memory test data, please do a

backup of these data to avoid loss.

(2) Please pack the instrument in its original case when

shipping.

(3) In case of use of other case, please make sure there is

at lease 3cm thick soft padding around the instrument to

absorb the impact of external force.

(4)Please write the address, telephone, description, etc. in

detail when returning.

(5) Please secure the case with tape well before shipping.

(6) The damage due to improper packing during returning is

not within the scope of warranty.

Chapter 1 Overview

Overview

of Instrument

AV6418 Optical Time Domain Reflectometer (hereinafter

referred to as AV6418 OTDR) is a kind of multifunctional test

Página No.25 LCFS

CONVALIDACIÓN DE ERRORES DEL PROCESO:

“ADQUISICIÓN DE OTDR (OPTICAL TIME DOMAIN REFLECTOMETER) – REDES GPON/
FTTH/ SDH"

Summary of Contents for AV6418 OTDR











































































































































































Search results

Summary of Contents for AV6418 OTDR

Reviews:

Senter AV6418 OTDR, User Manual, Page: 17 / 170

Search results

Summary of Contents for AV6418 OTDR

Reviews: