Senter AV6418 OTDR User Manual Download Page 77

Page: 77 / 170

SIE-CNTEP-1100002104-2014
LCFS

AV6418 OTDR

cursor (

) to

“

Range

”

option; then use

keys to

change and set the mode option. Finally press key to

confirm the setting and exit from the setup interface back to

the main screen; press key to cancel the setting back to the

main screen.

(1) The values of range are 400m, 800m, 1.6km, 3.2km,

8km, 16km, 32km, 64km, 128km, 256km and 512km.

(2) It should be increased to a value greater than the fiber

length (best twice than the fiber length).

1.2.6 Set Test Pulse Width

Modify and set the OTDR pulse width through the following

description:

Figure 8-14 Set test pulse width

Touchscreen Operation: Press

“

Pulse

”

option bar, the

Página No.85 LCFS

CONVALIDACIÓN DE ERRORES DEL PROCESO:

“ADQUISICIÓN DE OTDR (OPTICAL TIME DOMAIN REFLECTOMETER) – REDES GPON/
FTTH/ SDH"

Summary of Contents for AV6418 OTDR











































































































































































Search results

Summary of Contents for AV6418 OTDR

Reviews:

Senter AV6418 OTDR, User Manual, Page: 77 / 170

Search results

Summary of Contents for AV6418 OTDR

Reviews: