Senter AV6418 OTDR User Manual Download Page 111

Page: 111 / 170

SIE-CNTEP-1100002104-2014
LCFS

AV6418 OTDR

107

OTDR test port reliably.

Enter OTDR test condition setup interface. (See P27 for

the detail of the operation )

Use / to move active cursor ( ) to

“

Mode

”

option or press

“

Mode

”

option directly through touchscreen to select the

OTDR test mode:

Real-Time Test

Average Test

Dead

Zone Test.

Operate it the same as above, set test

Wavelength,

Pulse Width, Att. IOR, Helix

and all

Threshold

. When the

test mode is average test or dead zone test, the average

times should be set.

Confirm OTDR parameter setting and return to main

screen. Press key, the instrument will scan optical fiber to be

tested according to the set test mode and test parameter

and display the trace on the operating interface.

Press key to stop sweep test at any time. If the test

mode is average test or dead zone test, the average times

displayed in the trace displayer area is equal to the set

average times, the instrument will automatically stop testing.

Press

【

Analyse

】

menu item on the main menu bar, the

instrument will automatically analyze the trace and give

event table according to the set event threshold. If it is set

“

Auto analyse after sampling

”

, when stopping test, the

instrument will automatically analyze the trace.

It can also set the proper mark point position through

setting test item, check the distance and loss information of

the optical fiber to be tested on the trace and result display

area.

Página No.119 LCFS

CONVALIDACIÓN DE ERRORES DEL PROCESO:

“ADQUISICIÓN DE OTDR (OPTICAL TIME DOMAIN REFLECTOMETER) – REDES GPON/
FTTH/ SDH"

Summary of Contents for AV6418 OTDR











































































































































































Search results

Summary of Contents for AV6418 OTDR

Reviews:

Related manuals for AV6418 OTDR

Brands by name

Popular brands

Senter AV6418 OTDR, User Manual

Search results

Summary of Contents for AV6418 OTDR

Reviews:

Related manuals for AV6418 OTDR

Brands by name

Popular brands