Senter AV6418 OTDR User Manual Download Page 147

Page: 147 / 170

SIE-CNTEP-1100002104-2014
LCFS

AV6418 OTDR

143

USB port or SD card slot of the AV6418 OTDR.

Press

【

System

】

menu in the first menu of main screen

into setup sub-menu. Press

【

Upgrade

】

in the sub-menu

bar, upgrade prompting message box appears.

Press

【

Enter

】

button in prompting message box or

press

into system upgrading interface.

According to prompt on display interface, press

system upgrade will act to upgrade and update system files

of instrument. After upgrade, user has to power up again.

Do not power off or pull USD disk or SD card out during

system upgrade, otherwise it will cause system upgrade

failure

and

make

instrument

incapable

operating

normally.

12 Calibrating touchscreen

Operational procedures for calibrating touchscreen are as

follow:

Press

【

System

】

menu in the first menu of main screen

into setup sub-menu. Press

【

Touch-Cal.

】

in the sub-menu

bar.

Click the center of cross cursor with touch pen when

the cross cursor is displayed.

Página No.155 LCFS

CONVALIDACIÓN DE ERRORES DEL PROCESO:

“ADQUISICIÓN DE OTDR (OPTICAL TIME DOMAIN REFLECTOMETER) – REDES GPON/
FTTH/ SDH"

Summary of Contents for AV6418 OTDR











































































































































































Search results

Summary of Contents for AV6418 OTDR

Reviews:

Senter AV6418 OTDR, User Manual, Page: 147 / 170

Search results

Summary of Contents for AV6418 OTDR

Reviews: