Senter AV6418 OTDR User Manual Download Page 150

Page: 150 / 170

SIE-CNTEP-1100002104-2014
LCFS

AV6418 OTDR

146

breakage.

Type of optical

fiber splice

does not match

End type of the optical

fiber splice tested

must

match with that of the

OTDR light output

splice.

Otherwise it must use

the patch cord for

switch

over.

12.1 Trace test and failure cause analysis

If the result of trace test and analysis is widely different from

expected, or the expected result is not achieved, it may be

caused by one of the following:

Failed to obtain the test trace of optical fiber

If the test trace only shows front end reflection peak, but

fails to obtain the linearity trace which may reflecting

characteristics of optical fiber, please check:

If the type of tested fiber end matches with the type of

fiber end at OTDR optical output port.

If the fiber end is polluted.

If the optical output flange of OTDR is cracked.

Check the near end of tested fiber link for high loss with

the VFL function.

Página No.158 LCFS

CONVALIDACIÓN DE ERRORES DEL PROCESO:

“ADQUISICIÓN DE OTDR (OPTICAL TIME DOMAIN REFLECTOMETER) – REDES GPON/
FTTH/ SDH"

Summary of Contents for AV6418 OTDR











































































































































































Search results

Summary of Contents for AV6418 OTDR

Reviews:

Related manuals for AV6418 OTDR

Brands by name

Popular brands

Senter AV6418 OTDR, User Manual

Search results

Summary of Contents for AV6418 OTDR

Reviews:

Related manuals for AV6418 OTDR

Brands by name

Popular brands